GHL high speed mixing granulator
Principle of Work:
The powder raw material and adhesive in a cylinder are mixed fully at the bottom to become a humid soft material. The it is cut through high-speed crusher and become uniform granules.
Feature of Product:
The machine adapts horizontal cylinder structure. Its structure is reasonable.
Use air filled seal shaft to drive. When washing, it can be changed to water;
Use fluidization to Granulate and the granule is near ball. Its flow is good;
Compared the traditional process,25% of adhesive can be reduced and the drying time can be shorted;
The time of mixing in dry is 2 minutes and the time of granulating is 1-4 minutes .Compared with the traditional process,4-5 times of efficiency is raised;
In the same sealed container, dry mixing, humidity mixing and granulating can be finished. It is in conformity with the requirements of GMP;
The whole operation has strict safe and protective measures.