Instruction and features:

Suitable for ampoule, vial, oral liquid and other small round bottle automatic printing, tray forming and feeding in tray.

This machine is an improved product innovated by our company  that incorporates pneumatic-photo-electro-mechanic, controlled by PLC and man-machine interface operation. It meets packing requirement of small round bottle as ampoule for automatic printing, tray forming, feeding and cutting. It is featured by compact construction and convenient operation.

Automatic production line of up and lower heating, positive press forming(tray forming),printing, automatic feeding(feed in tray) and cutting.

Equipped with mechanism checking device, eject empty or lack packing tray automatically.

Blister forming, heat-sealing, lot number embossing, avulsion line impressing and cutting etc all adopt gear mandrel orientation, each can move freely in the mandrel when rotating the hand wheel, and the machine equipped with a staff gauge and tightening nuts for calibration and orientation.

It can line with labeling machine in front and cartoning machine in back part, carry out the whole automatic production line.

Main transmission part adopts parallel axis and bevel wheel speed reducer. Forming, heat-sealing and impressing moulds adopt bolt orientating which leads to precise orientation, easy to change moulds and material saving.

 
Main technical parameters:

Model	DPB-250	DPB-320	DPB-350
Cutting frequency(times/min)	10-30
Production capacity(ten thousand pcs/h)	1.2-3	1.3-3.5	1.5-3.8
Max forming areas and depth(mm)	240*140*26(standard:14)
Travel range(mm)	40-150
Air Pressure(Mpa)	0.4-0.6
Air Supply	≥0.35m3/min
Total Power	380V/220V 50Hz 6.2kw
Main Motor Power (KW)	1.5
PVC rigid sheet(mm)	0.25-0.5*250(320/350)
PTP aluminum foil(mm)	0.025-0.035*250(320/350)
Dialysis paper(mm)	50-100g*250(320/350)
Mould cooling	Tap water or circulating water
Overall dimensions(mm)	3000*730*1600	3000*780*1600	3000*800*1600
Weight(Kg)	1600	1900	2100